The SBX220 is a compact, high-powered subwoofer with an enclosure styled to complement JFX Series loudspeakers. It contains two advanced 12 inch woofers mounted in a “clam shell” driver arrangement, which provides tight driver coupling to increase output. A massive port radiates the considerable energy needed at the enclosure’s tuning frequency to complement the JFX Series’ high output. The enclosure includes balance-optimized recessed handles and rubber feet. A reinforced pole-mount receptacle allows the SBX220 to double as a base for use with any JFX full range system. The grille is internally braced to withstand the rigors of portable use. The input connector for the SBX220 is a Neutrik NL4 using pins 2+/-. The input is looped through to a second NL4 for connection to additional SBX220s. Pins 1+/- can be used for connection and loop through of the signals for a companion full-range loudspeaker. This means a single loudspeaker cable to the SBX220 can power both the subwoofer and full-range loudspeakers.
The SBX220 is intended primarily for portable applications, but it may readily be used in installations where space is restricted. At only 18 inches high, it is very effective in houses of worship, clubs, and theatres where subwoofers must be installed under a low stage.
- Operationg Range (-10dB, Hz) 32 - 300
- Axial Sensitivity (1W @ 1m, dB SPL) Sub: 98
- Impedance (Watts @ Ohms) Sub - SIngle Amp: 1400 @ 4
- Dimensions (mm) 457 x 648 x 762
- Weight (Kg) 47.7